NASA Sentinel-5P Project

Description

Sentinel-5P: Unveiling mission goals, applications, sensor insights, and product details, including advanced processing algorithms.

S5P_L2__AER_AI_HiR

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L2__AER_AI_1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. The TROPOMI UV Aerosol Index has been calculated based on wavelength dependent changes in Rayleigh scattering in the UV spectral range where ozone absorption is weak. A residual value is calculated from measured top-of-atmosphere (TOA) reflectance and per-calculated theoretical reflectance for a Rayleigh scattering-only atmosphere given a wavelength pair. TROPOMI UVAI products use the classical wavelength pair of 340/380 nm, and the OMI chosen 354/388 nm pair for the long-term continuous AI record. Figure 1 shows TROPOMI UVAI of orbit# 4060.

S5P_L2__AER_AI

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data after August 6th of 2019, please check S5P_L2__AER_AI data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. The TROPOMI UV Aerosol Index has been calculated based on wavelength dependent changes in Rayleigh scattering in the UV spectral range where ozone absorption is weak. A residual value is calculated from measured top-of-atmosphere (TOA) reflectance and per-calculated theoretical reflectance for a Rayleigh scattering-only atmosphere given a wavelength pair. TROPOMI UVAI products use the classical wavelength pair of 340/380 nm, and the OMI chosen 354/388 nm pair for the long-term continuous AI record. Figure 1 shows TROPOMI UVAI of orbit# 4060.

S5P_L2__AER_LH_HiR

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L2__AER_LH_1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. Copernicus Sentinel-5P TROPOMI aerosol layer height algorithm applies a forward model, which includes DISAMAR (Determining Instrument Specifications and Analyzing Methods for Atmospheric Retrieval, a Layer-Based Orders of Scattering algorithm) to calculate monochromatic reflectance, and also employs a neural network scheme for speedy processor performance. Data retrieval uses the Optimal Estimation Method (OEM) for spectral fitting with various aerosol layer pressures and aerosol optical thicknesses in the Oxygen-A band (758 -770nm). The aerosol baseline model assumes a single uniformly distributed aerosol layer with a fixed pressure thickness and a constant aerosol volume extinction coefficient and single scattering albedo. The aerosol parameterization is particularly suitable for elevated non-scattering aerosols such as volcanic ash, desert dust and biomass burning plume. The product main outputs include the mid-pressure and mid-altitude of aerosol layers, aerosol optical thickness at 760nm, error estimates, and other relevant diagnostics. Starting from orbit #12432 on March 7th of 2020, the S-NPP auxiliary cloud data source used in the aerosol layer height product data processing has been transitioned from the VIIRS Cloud Mask (VCM) into the Enterprise Cloud Mask (ECM).

S5P_L2__AER_LH

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data after August 6th of 2019, please check S5P_L2__AER_LH data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. Copernicus Sentinel-5P TROPOMI aerosol layer height algorithm applies a forward model, which includes DISAMAR (Determining Instrument Specifications and Analyzing Methods for Atmospheric Retrieval, a Layer-Based Orders of Scattering algorithm) to calculate monochromatic reflectance, and also employs a neural network scheme for speedy processor performance. Data retrieval uses the Optimal Estimation Method (OEM) for spectral fitting with various aerosol layer pressures and aerosol optical thicknesses in the Oxygen-A band (758 -770nm). The aerosol baseline model assumes a single uniformly distributed aerosol layer with a fixed pressure thickness and a constant aerosol volume extinction coefficient and single scattering albedo. The aerosol parameterization is particularly suitable for elevated non-scattering aerosols such as volcanic ash, desert dust and biomass burning plume. The product main outputs include the mid-pressure and mid-altitude of aerosol layers, aerosol optical thickness at 760nm, error estimates, and other relevant diagnostics.

S5P_L2__CO_____HiR

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L2__CO_____1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. The TROPOMI Carbon Monoxide total column applies a modified SWIR CO retrieval (SICOR) algorithm based on the CO absorption band between 2305 nm and 2385 nm. The S5P SICOR algorithm accounts for cloudy and aerosol loaded atmosphere conditions and is suitable for clear sky observations over land and cloudy observations over both land and oceans.

S5P_L2__CO____

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data after August 6th of 2019, please check S5P_L2__CO____ data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. The TROPOMI Carbon Monoxide total column applies a modified SWIR CO retrieval (SICOR) algorithm based on the CO absorption band between 2305 nm and 2385 nm. The S5P SICOR algorithm accounts for cloudy and aerosol loaded atmosphere conditions and is suitable for clear sky observations over land and cloudy observations over both land and oceans.

S5P_L2__CLOUD__HiR

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. Starting from July 13th in 2020, five Sentinel-5P TROPOMI level-2 products including total and tropospheric column ozone, sulfur dioxide, CLOUD, and formaldehyde have been generated in processor version 2. For data before August 6th of 2019, please check S5P_L2__CLOUD__1 data collection. For data between August 6th of 2019 and July 13th of 2020, please check S5P_L2__CLOUD__HiR_1 data collection. For data after July 13th of 2020, please check S5P_L2__CLOUD__HiR_2 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. The TROPOMI Cloud products are retrieved by two algorithms. The S5P_CLOUD_OCRA is based on the Optical Cloud Recognition Algorithm which generates the fractional cloud cover. The S5P_CLOUD_ROCINN (the Retrieval Of Cloud Information through Neural Networks algorithm) is built on measurements in and around the O2 A-band, which produces the cloud optical thickness and the cloud top height.

S5P_L1B_IR_SIR

The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.

S5P_L1B_IR_SIR

Starting with version 3, Calibration Key Data (CKD) have been updated. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.

S5P_L2__CH4____HiR

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L2__CH4____1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. The retrieval algorithm for Sentinel-5P TROPOMI methane product is a physics based method that uses the Oxygen-A band (760 nm) and absorption bands in shortwave infrared spectrum. In Sentinel-5P/TROPOMI methane algorithm, the atmosphere forward model simulates the absorbing gas (oxygen, methane, water vapor, and carbon monoxide) optical properties, as well as aerosol optical properties with size distribution, refractive index, and number concentration. The inversion is performed based on the forward calculation, the measurement, and the prior information. Cloud filtering is critical in methane retrieval, S5P methane algorithm applies re-gridded Visible Infrared Imaging Radiometer Suite (VIIRS) cloud mask data. Additional cloud filters based on S5P/TROPOMI measurements and the FRESCO apparent surface pressure will be applied when VIIRS cloud data are not available. Other current data filters in the retrieval algorithm include land-only pixels (excluding mountainous areas), spectrum intensity, solar zenith angle and instrument zenith angle. The S5P/TROPOMI methane retrieval is for non-time-critical (NTC) data stream only, and its main outputs include the column averaged dry air mixing ratio of methane, the random error, and the biased corrected dry air methane fraction data based on the retrieved surface albedo. Starting from orbit #12432 on March 7th of 2020, the S-NPP auxiliary cloud data source used in the methane product data processing has been transitioned from the VIIRS Cloud Mask (VCM) into the Enterprise Cloud Mask (ECM). The data are stored in an enhanced netCDF-4 format.

S5P_L2__CH4___

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data after August 6th of 2019, please check S5P_L2__CH4___ data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. The retrieval algorithm for Sentinel-5P TROPOMI methane product is a physics based method that uses the Oxygen-A band (760 nm) and absorption bands in shortwave infrared spectrum. In Sentinel-5P/TROPOMI methane algorithm, the atmosphere forward model simulates the absorbing gas (oxygen, methane, water vapor, and carbon monoxide) optical properties, as well as aerosol optical properties with size distribution, refractive index, and number concentration. The inversion is performed based on the forward calculation, the measurement, and the prior information. Cloud filtering is critical in methane retrieval, S5P methane algorithm applies re-gridded Visible Infrared Imaging Radiometer Suite (VIIRS) cloud mask data. Additional cloud filters based on S5P/TROPOMI measurements and the FRESCO apparent surface pressure will be applied when VIIRS cloud data are not available. Other current data filters in the retrieval algorithm include land-only pixels (excluding mountainous areas), spectrum intensity, solar zenith angle and instrument zenith angle. The S5P/TROPOMI methane retrieval is for non-time-critical (NTC) data stream only, and its main outputs include the column averaged dry air mixing ratio of methane, the random error, and the biased corrected dry air methane fraction data based on the retrieved surface albedo. The data are stored in an enhanced netCDF-4 format.

S5P_L2__AER_AI_HiR_NRT

The Sentinel-5P TROPOMI Near Real Time (NRT) Aerosol Index 1-Orbit L2 5.5km x 3.5km V2 (S5P_L2__AER_AI_HiR_NRT) at GES DISC is the near real time version of the offline S5P_L2__AER_AI_HiR data product. These data are typically available within three hours of measurement as required by the Land Atmosphere NRT Capability Earth Observing System (LANCE). These data are intended for a rapid turnaround assessment and are only archived for up to ten days. Users who require a longer data record, or wish to conduct rigorous analysis should use the offline version of this product S5P_L2__AER_AI_HiR. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. The TROPOMI UV Aerosol Index has been calculated based on wavelength dependent changes in Rayleigh scattering in the UV spectral range where ozone absorption is weak. A residual value is calculated from measured top-of-atmosphere (TOA) reflectance and per-calculated theoretical reflectance for a Rayleigh scattering-only atmosphere given a wavelength pair. TROPOMI UVAI products use the classical wavelength pair of 340/380 nm, and the OMI chosen 354/388 nm pair for the long-term continuous AI record. Figure 1 shows TROPOMI UVAI of orbit# 4060. Data are stored in individual files, or granules, that contain one orbit of information. The data are stored in netCDF4 data format and files and complete files are ~20 MB.

S5P_L2__CO_____HiR_NRT

The Sentinel-5P TROPOMI Near Real Time (NRT) Carbon Monoxide CO Column 1-Orbit L2 5.5km x 7km V2 (S5P_L2__CO_____HiR_NRT) at GES DISC is the near real time version of the offline S5P_L2__CO_____HiR data product. These data are typically available within three hours of measurement as required by the Land Atmosphere NRT Capability Earth Observing System (LANCE). These data are intended for a rapid turnaround assessment and are only archived for up to ten days. Users who require a longer data record, or wish to conduct rigorous analysis should use the offline version of this product S5P_L2__CO_____HiR. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. The TROPOMI Carbon Monoxide total column applies a modified SWIR CO retrieval (SICOR) algorithm based on the CO absorption band between 2305 nm and 2385 nm. The S5P SICOR algorithm accounts for cloudy and aerosol loaded atmosphere conditions and is suitable for clear sky observations over land and cloudy observations over both land and oceans. Data are stored in individual files, or granules, that contain one orbit of information. The data are stored in netCDF4 data format and files and complete files are ~20 MB.

S5P_L2__CH4____HiR_NRT

The Sentinel-5P TROPOMI Near Real Time (NRT) Methane CH4 1-Orbit L2 5.5km x 7km V2 (S5P_L2__CH4____HiR_NRT) at GES DISC is the near real time version of the offline S5P_L2__CH4____HiR data product. These data are typically available within three hours of measurement as required by the Land Atmosphere NRT Capability Earth Observing System (LANCE). These data are intended for a rapid turnaround assessment and are only archived for up to ten days. Users who require a longer data record, or wish to conduct rigorous analysis should use the offline version of this product S5P_L2__CH4____HiR. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. The S5P/TROPOMI methane retrieval is for non-time-critical (NTC) data stream only, and its main outputs include the column averaged dry air mixing ratio of methane, the random error, and the biased corrected dry air methane fraction data based on the retrieved surface albedo. Data are stored in individual files, or granules, that contain one orbit of information. The data are stored in netCDF4 data format and files and complete files are ~82 MB.

S5P_L1B_RA_BD3_HiR_NRT

The Sentinel-5P TROPOMI Near Real Time (NRT) Radiance product band 3 (UVIS detector) L1B 5.5km x 21km V3 (S5P_L1B_RA_BD3_HiR_NRT) product at GES DISC is the near real time version of the offline S5P_L1B_RA_BD3_HiR data product. These data are typically available within three hours of measurement as required by the Land Atmosphere NRT Capability Earth Observing System (LANCE). These data are intended for a rapid turnaround assessment and are only archived for up to ten days. Users who require a longer data record, or wish to conduct rigorous analysis should use the offline version of this product S5P_L1B_RA_BD3_HiR. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products. Data are stored in individual files, or granules, that contain one orbit of information. The data are stored in netCDF4 data format and files and complete files are ~0.650 GB.

S5P_L1B_RA_BD4_HiR_NRT

The Sentinel-5P TROPOMI Near Real Time (NRT) Radiance product band 4 (UVIS detector) L1B 5.5km x 21km V3 (S5P_L1B_RA_BD4_HiR_NRT) product at GES DISC is the near real time version of the offline S5P_L1B_RA_BD4_HiR data product. These data are typically available within three hours of measurement as required by the Land Atmosphere NRT Capability Earth Observing System (LANCE). These data are intended for a rapid turnaround assessment and are only archived for up to ten days. Users who require a longer data record, or wish to conduct rigorous analysis should use the offline version of this product S5P_L1B_RA_BD4_HiR. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products. Data are stored in individual files, or granules, that contain one orbit of information. The data are stored in netCDF4 data format and files and complete files are 0.650 GB.

S5P_L1B_RA_BD5_HiR_NRT

The Sentinel-5P TROPOMI Near Real Time (NRT) Radiance product band 5 (NIR detector) L1B 5.5km x 21km V3 (S5P_L1B_RA_BD5_HiR_NRT) product at GES DISC is the near real time version of the offline S5P_L1B_RA_BD4_HiR data product. These data are typically available within three hours of measurement as required by the Land Atmosphere NRT Capability Earth Observing System (LANCE). These data are intended for a rapid turnaround assessment and are only archived for up to ten days. Users who require a longer data record, or wish to conduct rigorous analysis should use the offline version of this product S5P_L1B_RA_BD5_HiR. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products. Data are stored in individual files, or granules, that contain one orbit of information. The data are stored in netCDF4 data format and files and complete files are ~0.650 GB.

S5P_L1B_RA_BD6_HiR_NRT

The Sentinel-5P TROPOMI Near Real Time (NRT) Radiance product band 6 (NIR detector) L1B 5.5km x 21km V3 (S5P_L1B_RA_BD6_HiR_NRT) product at GES DISC is the near real time version of the offline S5P_L1B_RA_BD1_HiR data product. These data are typically available within three hours of measurement as required by the Land Atmosphere NRT Capability Earth Observing System (LANCE). These data are intended for a rapid turnaround assessment and are only archived for up to ten days. Users who require a longer data record, or wish to conduct rigorous analysis should use the offline version of this product S5P_L1B_RA_BD6_HiR. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products. Data are stored in individual files, or granules, that contain one orbit of information. The data are stored in netCDF4 data format and files and complete files are ~0.650 GB.

S5P_L1B_RA_BD7_HiR_NRT

The Sentinel-5P TROPOMI Near Real Time (NRT) Radiance product band 7 (SWIR detector) L1B 5.5km x 21km V3 (S5P_L1B_RA_BD7_HiR_NRT) product at GES DISC is the near real time version of the offline S5P_L1B_RA_BD7_HiR data product. These data are typically available within three hours of measurement as required by the Land Atmosphere NRT Capability Earth Observing System (LANCE). These data are intended for a rapid turnaround assessment and are only archived for up to ten days. Users who require a longer data record, or wish to conduct rigorous analysis should use the offline version of this product S5P_L1B_RA_BD7_HiR. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products. Data are stored in individual files, or granules, that contain one orbit of information. The data are stored in netCDF4 data format and files and complete files are ~0.305 GB.

S5P_L2__SO2____HiR_NRT

The Sentinel-5P TROPOMI Near Real Time (NRT) Sulphur Dioxide SO2 1-Orbit L2 5.5km x 3.5km V2 (S5P_L2__SO2____HiR_NRT) at GES DISC is the near real time version of the offline S5P_L2__SO2____HiR data product. These data are typically available within three hours of measurement as required by the Land Atmosphere NRT Capability Earth Observing System (LANCE). These data are intended for a rapid turnaround assessment and are only archived for up to ten days. Users who require a longer data record, or wish to conduct rigorous analysis should use the offline version of this product S5P_L2__SO2____HiR. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. The retrieval algorithm for Sentinel-5P TROPOMI SO2 from ultraviolet spectral measurements is the Differential Optical Absorption Spectroscopy (DOAS) method. The relevant information of absorption cross section, instrument characteristics, cloud cover, and geolocation are utilized to derive SO2 slant column density (SCD). A sensitive spectral window of 312 to 326 nm is set as the baseline for the slant column fit with another two spectral windows (325 to 335 nm, 360 to 390 nm) to account for the non-linear effects in those high column amount cases. The SCD is then corrected with the empirical offsets to the systematic biases. The air mass factor (AMF) Look-up table has been created with the LIDORT radiative transfer model. The outputs of the DOAS algorithm are SO2 vertical column density (VCD), SCD, AMF, the DOAS-type averaging kernels (AK), and error estimates. Data are stored in individual files, or granules, that contain one orbit of information. The data are stored in netCDF4 data format and files and complete files are ~100 MB.

S5P_L2__O3_TOT_HiR_NRT

The Sentinel-5P TROPOMI Near Real Time (NRT) Total Ozone Column 1-Orbit L2 5.5km x 3.5km V2 (S5P_L2__O3_TOT_HiR_NRT) at GES DISC is the near real time version of the offline S5P_L2__O3_TOT_HiR data product. These data are typically available within three hours of measurement as required by the Land Atmosphere NRT Capability Earth Observing System (LANCE). These data are intended for a rapid turnaround assessment and are only archived for up to ten days. Users who require a longer data record, or wish to conduct rigorous analysis should use the offline version of this product S5P_L2__O3_TOT_HiR. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. This total column ozone product (S5P_L2__O3_TOT, aka ESA's S5P_L2__O3____) applies the the Direct-fitting algorithm (S5P_TO3_GODFIT), comprising a non-linear least squares inversion by comparing the simulated and measured backscattered radiances. The main products include total vertical column ozone, ozone effective temperature, and the error information in NetCDF-4 format. Data are stored in individual files, or granules, that contain one orbit of information. The data are stored in netCDF4 data format and files and complete files are ~40 MB.

S5P_L2__NO2____HiR_NRT

The Sentinel-5P TROPOMI Near Real Time (NRT) Tropospheric NO2 1-Orbit L2 5.5km x 3.5km V2 (S5P_L2__NO2____HiR_NRT) at GES DISC is the near real time version of the offline S5P_L2__NO2____HiR data product. These data are typically available within three hours of measurement as required by the Land Atmosphere NRT Capability Earth Observing System (LANCE). These data are intended for a rapid turnaround assessment and are only archived for up to ten days. Users who require a longer data record, or wish to conduct rigorous analysis should use the offline version of this product S5P_L2__NO2____HiR. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. The TROPOMI retrieval of total and tropospheric NO2, is based on the DOMINO approach, a DOAS retrieval, a pre-calculated air-mass factor (AMF) look-up table, and a data assimilation/chemistry transport model for the separation of the stratospheric and tropospheric contributions to the NO2 column. It also include many retrieval developments of the European Quality Assurance for Essential Climate Variables (QA4ECV) project. Data are stored in individual files, or granules, that contain one orbit of information. The data are stored in netCDF4 data format and files and complete files are ~60 MB.

S5P_L2__O3_TCL_NRT

The Sentinel-5P TROPOMI Near Real Time (NRT) Tropospheric Ozone Column V2 (S5P_L2__O3_TCL_NRT) at GES DISC is the near real time version of the offline S5P_L2__O3_TCL product. These data are typically available within three hours of measurement as required by the Land Atmosphere NRT Capability Earth Observing System (LANCE). These data are intended for a rapid turnaround assessment and are only archived for up to ten days. Users who require a longer data record, or wish to conduct rigorous analysis should use the offline version of this product S5P_L2__O3_TCL. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. Copernicus Sentinel-5P tropospheric ozone data products are retrieved by the convective-cloud-differential (CCD) algorithm to derive the tropospheric ozone columns and by the cloud slicing algorithm (CSA) to derive mean upper tropospheric ozone volume mixing ratios above the clouds. The S5P_TROPOZ_CCD algorithm uses TROPOMI Level-2 ozone column measurements and the cloud parameters provided by the S5P_CLOUD_OCRA and S5P_CLOUD_ROCINN, the average values of the tropospheric ozone columns below 270 hpa can be determined. The S5P_TROPOZ_CSA algorithm uses the correlation between could top pressure and the ozone column above the cloud. The retrieval depends on the amount of measurements with a high cloud cover. The products are restricted in the tropical region (-20 degrees to 20 degrees of latitude). The main outputs of the Copernicus S5P/TROPOMI tropospheric ozone product include the tropospheric ozone column and corresponding errors, upper tropospheric ozone and corresponding errors, stratospheric ozone column and corresponding errors, and the retrieval quality flags. The data are stored in an enhanced netCDF-4 format. Data are stored in individual files, or granules, that contain one orbit of information. The data are stored in netCDF4 data format and files and complete files are ~20 MB.

S5P_L2__O3__PR_HiR

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. S5P_L2__O3__PR_HiR data collection contains the high spatial resolution products. The Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. This product contains ozone profile with a vertical resolution of 6 km and a horizontal resolution of 30x30km2 observed at about 13:30 local solar time from spectra measured by TROPOMI

S5P_L1B_RA_BD1_HiR

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L1B_RA_BD1_1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.

S5P_L1B_RA_BD1_HiR

Starting with version 3, dynamic straylight correction has been implemented, residual background correction has been applied, and the Calibration Key Data (CKD) have been updated. Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L1B_RA_BD1_1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.

S5P_L1B_RA_BD1

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data after August 6th of 2019, please check S5P_L1B_RA_BD1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.

S5P_L1B_RA_BD2_HiR

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L1B_RA_BD2_1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.

S5P_L1B_RA_BD2

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data after August 6th of 2019, please check S5P_L1B_RA_BD2 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.

S5P_L1B_RA_BD3_HiR

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L1B_RA_BD3_1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.

S5P_L1B_RA_BD3_HiR

Starting with version 3, residual background correction has been applied, a correction has been introduced for a sharp detector feature, and the Calibration Key Data (CKD) have been updated. Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L1B_RA_BD3_1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.

S5P_L1B_RA_BD3

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data after August 6th of 2019, please check S5P_L1B_RA_BD3 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.

S5P_L1B_RA_BD4_HiR

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L1B_RA_BD4_1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.

S5P_L1B_RA_BD4_HiR

Starting with version 3, residual background correction has been applied and the Calibration Key Data (CKD) have been updated. Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L1B_RA_BD4_1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.

S5P_L1B_RA_BD4

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data after August 6th of 2019, please check S5P_L1B_RA_BD4 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.

S5P_L1B_RA_BD5_HiR

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L1B_RA_BD5_1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.

S5P_L1B_RA_BD5

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data after August 6th of 2019, please check S5P_L1B_RA_BD5 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.

S5P_L1B_RA_BD6_HiR

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L1B_RA_BD6_1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.

S5P_L1B_RA_BD6

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data after August 6th of 2019, please check S5P_L1B_RA_BD6 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.

S5P_L1B_RA_BD7_HiR

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L1B_RA_BD7_1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.

S5P_L1B_RA_BD7_HiR

Starting with version 3, Calibration Key Data (CKD) have been updated. Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L1B_RA_BD7_1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.

S5P_L1B_RA_BD7

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data after August 6th of 2019, please check S5P_L1B_RA_BD7 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.

S5P_L1B_RA_BD8_HiR

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L1B_RA_BD8_1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.

S5P_L1B_RA_BD8

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data after August 6th of 2019, please check S5P_L1B_RA_BD8 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.

S5P_L2__NP_BD7_HiR

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L2__NP_BD7_1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. Copernicus Sentinel-5P is flying in a loose formation with U.S. Suomi National Polar-orbiting Partnership (SNPP) so that S5P is able to utilize the high spatial resolution capability of the Visible Infrared Imager Radiometer Suite (VIIRS) instrument. S5P_L2_NP_BDx product contains VIIRS cloud information for each S5P across-track observation in a given band (i.e. band 3, band 6 and band 7). In addition to the nominal filed-of-view (FOV), the S5P_NPPC products are also generated for three scaled FOVs both in along and across-track directions to account for the presence of cloud covering a more extended area than the nominal FOV. The main output of S5P_L2_NP_BDx are the number of VIIRS pixels classified as confidently cloudy, probably cloudy, probably clear, and confidently clear; and the VIIRS sun-normalized radiance information in band M7, M9, and M11 such as mean, standard deviation, as well as number of valid radiance contributions.

S5P_L2__NP_BD7

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data after August 6th of 2019, please check S5P_L2__NP_BD7 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. Copernicus Sentinel-5P is flying in a loose formation with U.S. Suomi National Polar-orbiting Partnership (SNPP) so that S5P is able to utilize the high spatial resolution capability of the Visible Infrared Imager Radiometer Suite (VIIRS) instrument. S5P_L2_NP_BDx product contains VIIRS cloud information for each S5P across-track observation in a given band (i.e. band 3, band 6 and band 7). In addition to the nominal filed-of-view (FOV), the S5P_NPPC products are also generated for three scaled FOVs both in along and across-track directions to account for the presence of cloud covering a more extended area than the nominal FOV. The main output of S5P_L2_NP_BDx are the number of VIIRS pixels classified as confidently cloudy, probably cloudy, probably clear, and confidently clear; and the VIIRS sun-normalized radiance information in band M7, M9, and M11 such as mean, standard deviation, as well as number of valid radiance contributions.

S5P_L2__NP_BD3_HiR

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L2__NP_BD3_1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. Copernicus Sentinel-5P is flying in a loose formation with U.S. Suomi National Polar-orbiting Partnership (SNPP) so that S5P is able to utilize the high spatial resolution capability of the Visible Infrared Imager Radiometer Suite (VIIRS) instrument. S5P_L2_NP_BDx product contains VIIRS cloud information for each S5P across-track observation in a given band (i.e. band 3, band 6 and band 7). In addition to the nominal filed-of-view (FOV), the S5P_NPPC products are also generated for three scaled FOVs both in along and across-track directions to account for the presence of cloud covering a more extended area than the nominal FOV. The main output of S5P_L2_NP_BDx are the number of VIIRS pixels classified as confidently cloudy, probably cloudy, probably clear, and confidently clear; and the VIIRS sun-normalized radiance information in band M7, M9, and M11 such as mean, standard deviation, as well as number of valid radiance contributions.

S5P_L2__NP_BD3

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data after August 6th of 2019, please check S5P_L2__NP_BD3 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. Copernicus Sentinel-5P is flying in a loose formation with U.S. Suomi National Polar-orbiting Partnership (SNPP) so that S5P is able to utilize the high spatial resolution capability of the Visible Infrared Imager Radiometer Suite (VIIRS) instrument. S5P_L2_NP_BDx product contains VIIRS cloud information for each S5P across-track observation in a given band (i.e. band 3, band 6 and band 7). In addition to the nominal filed-of-view (FOV), the S5P_NPPC products are also generated for three scaled FOVs both in along and across-track directions to account for the presence of cloud covering a more extended area than the nominal FOV. The main output of S5P_L2_NP_BDx are the number of VIIRS pixels classified as confidently cloudy, probably cloudy, probably clear, and confidently clear; and the VIIRS sun-normalized radiance information in band M7, M9, and M11 such as mean, standard deviation, as well as number of valid radiance contributions.

S5P_L2__NP_BD6_HiR

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L2__NP_BD6_1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. Copernicus Sentinel-5P is flying in a loose formation with U.S. Suomi National Polar-orbiting Partnership (SNPP) so that S5P is able to utilize the high spatial resolution capability of the Visible Infrared Imager Radiometer Suite (VIIRS) instrument. S5P_L2_NP_BDx product contains VIIRS cloud information for each S5P across-track observation in a given band (i.e. band 3, band 6 and band 7). In addition to the nominal filed-of-view (FOV), the S5P_NPPC products are also generated for three scaled FOVs both in along and across-track directions to account for the presence of cloud covering a more extended area than the nominal FOV. The main output of S5P_L2_NP_BDx are the number of VIIRS pixels classified as confidently cloudy, probably cloudy, probably clear, and confidently clear; and the VIIRS sun-normalized radiance information in band M7, M9, and M11 such as mean, standard deviation, as well as number of valid radiance contributions.

S5P_L2__NP_BD6

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data after August 6th of 2019, please check S5P_L2__NP_BD6 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. Copernicus Sentinel-5P is flying in a loose formation with U.S. Suomi National Polar-orbiting Partnership (SNPP) so that S5P is able to utilize the high spatial resolution capability of the Visible Infrared Imager Radiometer Suite (VIIRS) instrument. S5P_L2_NP_BDx product contains VIIRS cloud information for each S5P across-track observation in a given band (i.e. band 3, band 6 and band 7). In addition to the nominal filed-of-view (FOV), the S5P_NPPC products are also generated for three scaled FOVs both in along and across-track directions to account for the presence of cloud covering a more extended area than the nominal FOV. The main output of S5P_L2_NP_BDx are the number of VIIRS pixels classified as confidently cloudy, probably cloudy, probably clear, and confidently clear; and the VIIRS sun-normalized radiance information in band M7, M9, and M11 such as mean, standard deviation, as well as number of valid radiance contributions.

S5P_L2__NO2____HiR

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L2__NO2____1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. The TROPOMI retrieval of total and tropospheric NO2, is based on the DOMINO approach, a DOAS retrieval, a pre-calculated air-mass factor (AMF) look-up table, and a data assimilation/chemistry transport model for the separation of the stratospheric and tropospheric contributions to the NO2 column. It also include many retrieval developments of the European Quality Assurance for Essential Climate Variables (QA4ECV) project.

S5P_L2__NO2___

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data after August 6th of 2019, please check S5P_L2__NO2___ data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. The TROPOMI retrieval of total and tropospheric NO2, is based on the DOMINO approach, a DOAS retrieval, a pre-calculated air-mass factor (AMF) look-up table, and a data assimilation/chemistry transport model for the separation of the stratospheric and tropospheric contributions to the NO2 column. It also include many retrieval developments of the European Quality Assurance for Essential Climate Variables (QA4ECV) project.

S5P_L2__O3_TCL

Starting from July 13th in 2020, five Sentinel-5P TROPOMI level-2 products including total and tropospheric column ozone, sulfur dioxide, CLOUD, and formaldehyde have been generated in processor version 2. For data after July 2nd of 2020, please check S5P_L2__O3_TCL_2 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. Copernicus Sentinel-5P tropospheric ozone data products are retrieved by the convective-cloud-differential (CCD) algorithm to derive the tropospheric ozone columns and by the cloud slicing algorithm (CSA) to derive mean upper tropospheric ozone volume mixing ratios above the clouds. The S5P_TROPOZ_CCD algorithm uses TROPOMI Level-2 ozone column measurements and the cloud parameters provided by the S5P_CLOUD_OCRA and S5P_CLOUD_ROCINN, the average values of the tropospheric ozone columns below 270 hpa can be determined. The S5P_TROPOZ_CSA algorithm uses the correlation between could top pressure and the ozone column above the cloud. The retrieval depends on the amount of measurements with a high cloud cover. The products are restricted in the tropical region (-20 degrees to 20 degrees of latitude). The main outputs of the Copernicus S5P/TROPOMI tropospheric ozone product include the tropospheric ozone column and corresponding errors, upper tropospheric ozone and corresponding errors, stratospheric ozone column and corresponding errors, and the retrieval quality flags. The data are stored in an enhanced netCDF-4 format.

S5P_L2__O3_TCL

Starting from July 13th in 2020, five Sentinel-5P TROPOMI level-2 products including total and tropospheric column ozone, sulfur dioxide, CLOUD, and formaldehyde have been generated in processor version 2. For data before July 13 of 2020, please check S5P_L2__O3_TCL_1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. Copernicus Sentinel-5P tropospheric ozone data products are retrieved by the convective-cloud-differential (CCD) algorithm to derive the tropospheric ozone columns and by the cloud slicing algorithm (CSA) to derive mean upper tropospheric ozone volume mixing ratios above the clouds. The S5P_TROPOZ_CCD algorithm uses TROPOMI Level-2 ozone column measurements and the cloud parameters provided by the S5P_CLOUD_OCRA and S5P_CLOUD_ROCINN, the average values of the tropospheric ozone columns below 270 hpa can be determined. The S5P_TROPOZ_CSA algorithm uses the correlation between could top pressure and the ozone column above the cloud. The retrieval depends on the amount of measurements with a high cloud cover. The products are restricted in the tropical region (-20 degrees to 20 degrees of latitude). The main outputs of the Copernicus S5P/TROPOMI tropospheric ozone product include the tropospheric ozone column and corresponding errors, upper tropospheric ozone and corresponding errors, stratospheric ozone column and corresponding errors, and the retrieval quality flags. The data are stored in an enhanced netCDF-4 format.

TROPOMAER

As part of the NASA's Making Earth System Data Records for Use in Research Environments (MEaSUREs) program, this projects describes a multi-decadal Fundamental Climate Data Record (FCDR) of calibrated radiances as well as an Earth System Data Record (ESDR) of aerosol properties over the continents derived from a 32-year record of satellite near-UV observations by three sensors. The Corpenicus Sentinel-5P TROPOMI Near UV (version 1) Aerosol Optical Depth and Single Scattering Albedo data product consists of aerosol absorption optical depth, aerosol total optical depth, aerosol layer height, aerosol UV index, and aerosol single scattering albedo at approximately 7.5kmx3km. This product also contains ancillary data for ocean corrected surface albedo and terrain pressure. Data since July 19, 2022 (orbit 24688) has been processed with the most recent calibrated L1B radiance data (version 2.0.1). Data prior to July 19, 2022, data was processed with version 2.0.0 L1B radiances. Soon, the entire record will be reprocessed using version 2.0.1 L1B data. Any upgrades will be posted here. These Level-2 data are stored in the NetCDF-4 format and are available from the Goddard Earth Sciences (GES) Data and Information Services Center (DISC).

Data Discovery

Explore this data using NASA's Earthdata Search, a comprehensive tool for discovering and visualizing Earth science datasets.

Data Access

Access requires an Earthdata Login account. Read our guide on obtaining AWS credentials to retrieve this data from AWS.

Update Frequency

Varies by dataset

License

Creative Commons BY 4.0

Documentation

https://sentinels.copernicus.eu/web/sentinel/copernicus/sentinel-5p

Managed By

See all datasets managed by NASA.

Contact

https://earthdata.nasa.gov/contact

How to Cite

NASA Sentinel-5P Project was accessed on DATE from https://registry.opendata.aws/nasa-sentinel-5p.