NASA ABLE-2 Project

Description

ABLE-2A_Aerosol_AircraftInSitu_Electra_Data is the in-situ aerosol data collected onboard the NASA Electra aircraft during the Amazon Boundary Layer Experiment - 2A (ABLE-2A) suborbital campaign. Data collection for this product is complete. From 1983-2001, NASA conducted a collection of field campaigns as part of the Global Tropospheric Experiment (GTE). Among those were the Amazon Boundary Layer Experiment (ABLE 2) campaigns. ABLE 2 was divided into two sub-campaigns, ABLE 2A (dry season) and ABLE 2B (wet season). ABLE 2A took place from July-August 1985, while ABLE 2B took place from April-May 1987. The goal of ABLE 2 was to better understand the role of tropics in global atmospheric chemistry and investigate processes which might lead to the enhanced concentrations of carbon monoxide (CO) in the tropical upper troposphere. ABLE 2 was a partnership with NASA and the Brazilian agency, Instituto Nacional de Pesquisas Espaciais (INPE), along with the Instituto Nacional de Pesquisas da Amazonia (INPA) providing facilities and logistical information. To accomplish its objectives, the ABLE 2 science team deployed the NASA Lockheed Electra aircraft, balloons, and free-flying sondes. Flights took place over the Amazon region in Brazil for both sub-campaigns. ABLE 2A consisted of 15 flights while ABLE 2B consisted of 21 flights with the fully equipped Electra. For most ABLE 2A flights, the data collected included in-situ measurements of CO2, CO, MHC, NO (nitric oxide), N2O, O3, DMS (dimethyl sulfide), aerosol composition, and meteorological parameters. ABLE 2B had the Electra instrumented with remote and in-situ techniques for measuring the atmospheric distribution of a variety of carbon, nitrogen, and sulfur gases; aerosol size and composition; and to measure ozone. The typical approach to flights involved high-altitude passes over research areas using the downward facing UV Differential Absorption Lidar (DIAL). The ABLE 2 campaign represents a modest advance in understanding the influence of the tropical rain forest ecosystem on the chemistry of the troposphere. Detailed descriptions related to the motivation, implementation, and instrument payloads are available in the ABLE 2A overview paper and the ABLE 2B overview paper. A collection of the publications based on ABLE 2A and 2B observation are available in the Journal of Geophysical Research special issues: Global Tropospheric Experiment/Chemical Instrumentation Test and Evaluation Results (GTE/ABLE 2A) and The Amazon Boundary Layer Experiment 2B.

ABLE-2A_TraceGas_AircraftInSitu_Electra_Data

ABLE-2A_TraceGas_AircraftInSitu_Electra_Data is the in-situ trace gas data collected onboard the NASA Electra aircraft during the Amazon Boundary Layer Experiment - 2A (ABLE-2A) suborbital campaign. Data using chemiluminescence, gas traps, cryogenic air samples, and IR lasers are featured in this collection. Data collection for this product is complete. From 1983-2001, NASA conducted a collection of field campaigns as part of the Global Tropospheric Experiment (GTE). Among those were the Amazon Boundary Layer Experiment (ABLE 2) campaigns. ABLE 2 was divided into two sub-campaigns, ABLE 2A (dry season) and ABLE 2B (wet season). ABLE 2A took place from July-August 1985, while ABLE 2B took place from April-May 1987. The goal of ABLE 2 was to better understand the role of tropics in global atmospheric chemistry and investigate processes which might lead to the enhanced concentrations of carbon monoxide (CO) in the tropical upper troposphere. ABLE 2 was a partnership with NASA and the Brazilian agency, Instituto Nacional de Pesquisas Espaciais (INPE), along with the Instituto Nacional de Pesquisas da Amazonia (INPA) providing facilities and logistical information. To accomplish its objectives, the ABLE 2 science team deployed the NASA Lockheed Electra aircraft, balloons, and free-flying sondes. Flights took place over the Amazon region in Brazil for both sub-campaigns. ABLE 2A consisted of 15 flights while ABLE 2B consisted of 21 flights with the fully equipped Electra. For most ABLE 2A flights, the data collected included in-situ measurements of CO2, CO, MHC, NO (nitric oxide), N2O, O3, DMS (dimethyl sulfide), aerosol composition, and meteorological parameters. ABLE 2B had the Electra instrumented with remote and in-situ techniques for measuring the atmospheric distribution of a variety of carbon, nitrogen, and sulfur gases; aerosol size and composition; and to measure ozone. The typical approach to flights involved high-altitude passes over research areas using the downward facing UV Differential Absorption Lidar (DIAL). The ABLE 2 campaign represents a modest advance in understanding the influence of the tropical rain forest ecosystem on the chemistry of the troposphere. Detailed descriptions related to the motivation, implementation, and instrument payloads are available in the ABLE 2A overview paper and the ABLE 2B overview paper. A collection of the publications based on ABLE 2A and 2B observation are available in the Journal of Geophysical Research special issues: Global Tropospheric Experiment/Chemical Instrumentation Test and Evaluation Results (GTE/ABLE 2A) and The Amazon Boundary Layer Experiment 2B.

ABLE-2A_MetNav_AircraftInSitu_Electra_Data

ABLE-2A_MetNav_AircraftInSitu_Electra_Data is the in-situ meteorology and navigational data collected onboard the NASA Electra aircraft during the Amazon Boundary Layer Experiment - 2A (ABLE-2A) suborbital campaign. Data collection for this product is complete. From 1983-2001, NASA conducted a collection of field campaigns as part of the Global Tropospheric Experiment (GTE). Among those were the Amazon Boundary Layer Experiment (ABLE 2) campaigns. ABLE 2 was divided into two sub-campaigns, ABLE 2A (dry season) and ABLE 2B (wet season). ABLE 2A took place from July-August 1985, while ABLE 2B took place from April-May 1987. The goal of ABLE 2 was to better understand the role of tropics in global atmospheric chemistry and investigate processes which might lead to the enhanced concentrations of carbon monoxide (CO) in the tropical upper troposphere. ABLE 2 was a partnership with NASA and the Brazilian agency, Instituto Nacional de Pesquisas Espaciais (INPE), along with the Instituto Nacional de Pesquisas da Amazonia (INPA) providing facilities and logistical information. To accomplish its objectives, the ABLE 2 science team deployed the NASA Lockheed Electra aircraft, balloons, and free-flying sondes. Flights took place over the Amazon region in Brazil for both sub-campaigns. ABLE 2A consisted of 15 flights while ABLE 2B consisted of 21 flights with the fully equipped Electra. For most ABLE 2A flights, the data collected included in-situ measurements of CO2, CO, MHC, NO (nitric oxide), N2O, O3, DMS (dimethyl sulfide), aerosol composition, and meteorological parameters. ABLE 2B had the Electra instrumented with remote and in-situ techniques for measuring the atmospheric distribution of a variety of carbon, nitrogen, and sulfur gases; aerosol size and composition; and to measure ozone. The typical approach to flights involved high-altitude passes over research areas using the downward facing UV Differential Absorption Lidar (DIAL). The ABLE 2 campaign represents a modest advance in understanding the influence of the tropical rain forest ecosystem on the chemistry of the troposphere. Detailed descriptions related to the motivation, implementation, and instrument payloads are available in the ABLE 2A overview paper and the ABLE 2B overview paper. A collection of the publications based on ABLE 2A and 2B observation are available in the Journal of Geophysical Research special issues: Global Tropospheric Experiment/Chemical Instrumentation Test and Evaluation Results (GTE/ABLE 2A) and The Amazon Boundary Layer Experiment 2B.

ABLE-2A_Ground_Data

ABLE-2A_Ground_Data is the ground site data collected during the Amazon Boundary Layer Experiment - 2A (ABLE-2A) suborbital campaign. Data collection for this product is complete. From 1983-2001, NASA conducted a collection of field campaigns as part of the Global Tropospheric Experiment (GTE). Among those were the Amazon Boundary Layer Experiment (ABLE 2) campaigns. ABLE 2 was divided into two sub-campaigns, ABLE 2A (dry season) and ABLE 2B (wet season). ABLE 2A took place from July-August 1985, while ABLE 2B took place from April-May 1987. The goal of ABLE 2 was to better understand the role of tropics in global atmospheric chemistry and investigate processes which might lead to the enhanced concentrations of carbon monoxide (CO) in the tropical upper troposphere. ABLE 2 was a partnership with NASA and the Brazilian agency, Instituto Nacional de Pesquisas Espaciais (INPE), along with the Instituto Nacional de Pesquisas da Amazonia (INPA) providing facilities and logistical information. To accomplish its objectives, the ABLE 2 science team deployed the NASA Lockheed Electra aircraft, balloons, and free-flying sondes. Flights took place over the Amazon region in Brazil for both sub-campaigns. ABLE 2A consisted of 15 flights while ABLE 2B consisted of 21 flights with the fully equipped Electra. For most ABLE 2A flights, the data collected included in-situ measurements of CO2, CO, MHC, NO (nitric oxide), N2O, O3, DMS (dimethyl sulfide), aerosol composition, and meteorological parameters. ABLE 2B had the Electra instrumented with remote and in-situ techniques for measuring the atmospheric distribution of a variety of carbon, nitrogen, and sulfur gases; aerosol size and composition; and to measure ozone. The typical approach to flights involved high-altitude passes over research areas using the downward facing UV Differential Absorption Lidar (DIAL). The ABLE 2 campaign represents a modest advance in understanding the influence of the tropical rain forest ecosystem on the chemistry of the troposphere. Detailed descriptions related to the motivation, implementation, and instrument payloads are available in the ABLE 2A overview paper and the ABLE 2B overview paper. A collection of the publications based on ABLE 2A and 2B observation are available in the Journal of Geophysical Research special issues: Global Tropospheric Experiment/Chemical Instrumentation Test and Evaluation Results (GTE/ABLE 2A) and The Amazon Boundary Layer Experiment 2B.

ABLE-2A_Merge_Data

ABLE-2A_Merge_Data is the merge data collected onboard the NASA Electra aircraft during the Amazon Boundary Layer Experiment - 2A (ABLE-2A) suborbital campaign. Data collection for this product is complete. From 1983-2001, NASA conducted a collection of field campaigns as part of the Global Tropospheric Experiment (GTE). Among those were the Amazon Boundary Layer Experiment (ABLE 2) campaigns. ABLE 2 was divided into two sub-campaigns, ABLE 2A (dry season) and ABLE 2B (wet season). ABLE 2A took place from July-August 1985, while ABLE 2B took place from April-May 1987. The goal of ABLE 2 was to better understand the role of tropics in global atmospheric chemistry and investigate processes which might lead to the enhanced concentrations of carbon monoxide (CO) in the tropical upper troposphere. ABLE 2 was a partnership with NASA and the Brazilian agency, Instituto Nacional de Pesquisas Espaciais (INPE), along with the Instituto Nacional de Pesquisas da Amazonia (INPA) providing facilities and logistical information. To accomplish its objectives, the ABLE 2 science team deployed the NASA Lockheed Electra aircraft, balloons, and free-flying sondes. Flights took place over the Amazon region in Brazil for both sub-campaigns. ABLE 2A consisted of 15 flights while ABLE 2B consisted of 21 flights with the fully equipped Electra. For most ABLE 2A flights, the data collected included in-situ measurements of CO2, CO, MHC, NO (nitric oxide), N2O, O3, DMS (dimethyl sulfide), aerosol composition, and meteorological parameters. ABLE 2B had the Electra instrumented with remote and in-situ techniques for measuring the atmospheric distribution of a variety of carbon, nitrogen, and sulfur gases; aerosol size and composition; and to measure ozone. The typical approach to flights involved high-altitude passes over research areas using the downward facing UV Differential Absorption Lidar (DIAL). The ABLE 2 campaign represents a modest advance in understanding the influence of the tropical rain forest ecosystem on the chemistry of the troposphere. Detailed descriptions related to the motivation, implementation, and instrument payloads are available in the ABLE 2A overview paper and the ABLE 2B overview paper. A collection of the publications based on ABLE 2A and 2B observation are available in the Journal of Geophysical Research special issues: Global Tropospheric Experiment/Chemical Instrumentation Test and Evaluation Results (GTE/ABLE 2A) and The Amazon Boundary Layer Experiment 2B.

ABLE-2A_Sondes_Data

ABLE-2A_Sondes_Data is the radiosonde and rawinsonde data collected during the Amazon Boundary Layer Experiment - 2A (ABLE-2A) suborbital campaign. Data collection for this product is complete. From 1983-2001, NASA conducted a collection of field campaigns as part of the Global Tropospheric Experiment (GTE). Among those were the Amazon Boundary Layer Experiment (ABLE 2) campaigns. ABLE 2 was divided into two sub-campaigns, ABLE 2A (dry season) and ABLE 2B (wet season). ABLE 2A took place from July-August 1985, while ABLE 2B took place from April-May 1987. The goal of ABLE 2 was to better understand the role of tropics in global atmospheric chemistry and investigate processes which might lead to the enhanced concentrations of carbon monoxide (CO) in the tropical upper troposphere. ABLE 2 was a partnership with NASA and the Brazilian agency, Instituto Nacional de Pesquisas Espaciais (INPE), along with the Instituto Nacional de Pesquisas da Amazonia (INPA) providing facilities and logistical information. To accomplish its objectives, the ABLE 2 science team deployed the NASA Lockheed Electra aircraft, balloons, and free-flying sondes. Flights took place over the Amazon region in Brazil for both sub-campaigns. ABLE 2A consisted of 15 flights while ABLE 2B consisted of 21 flights with the fully equipped Electra. For most ABLE 2A flights, the data collected included in-situ measurements of CO2, CO, MHC, NO (nitric oxide), N2O, O3, DMS (dimethyl sulfide), aerosol composition, and meteorological parameters. ABLE 2B had the Electra instrumented with remote and in-situ techniques for measuring the atmospheric distribution of a variety of carbon, nitrogen, and sulfur gases; aerosol size and composition; and to measure ozone. The typical approach to flights involved high-altitude passes over research areas using the downward facing UV Differential Absorption Lidar (DIAL). The ABLE 2 campaign represents a modest advance in understanding the influence of the tropical rain forest ecosystem on the chemistry of the troposphere. Detailed descriptions related to the motivation, implementation, and instrument payloads are available in the ABLE 2A overview paper and the ABLE 2B overview paper. A collection of the publications based on ABLE 2A and 2B observation are available in the Journal of Geophysical Research special issues: Global Tropospheric Experiment/Chemical Instrumentation Test and Evaluation Results (GTE/ABLE 2A) and The Amazon Boundary Layer Experiment 2B.

ABLE-2B_Aerosol_AircraftInSitu_Electra_Data

ABLE-2B_Aerosol_AircraftInSitu_Electra_Data is the in-situ aerosol data collected onboard the NASA Electra aircraft during the Amazon Boundary Layer Experiment - 2B (ABLE-2B) suborbital campaign. Data collection for this product is complete. From 1983-2001, NASA conducted a collection of field campaigns as part of the Global Tropospheric Experiment (GTE). Among those were the Amazon Boundary Layer Experiment (ABLE 2) campaigns. ABLE 2 was divided into two sub-campaigns, ABLE 2A (dry season) and ABLE 2B (wet season). ABLE 2A took place from July-August 1985, while ABLE 2B took place from April-May 1987. The goal of ABLE 2 was to better understand the role of tropics in global atmospheric chemistry and investigate processes which might lead to the enhanced concentrations of carbon monoxide (CO) in the tropical upper troposphere. ABLE 2 was a partnership with NASA and the Brazilian agency, Instituto Nacional de Pesquisas Espaciais (INPE), along with the Instituto Nacional de Pesquisas da Amazonia (INPA) providing facilities and logistical information. To accomplish its objectives, the ABLE 2 science team deployed the NASA Lockheed Electra aircraft, balloons, and free-flying sondes. Flights took place over the Amazon region in Brazil for both sub-campaigns. ABLE 2A consisted of 15 flights while ABLE 2B consisted of 21 flights with the fully equipped Electra. For most ABLE 2A flights, the data collected included in-situ measurements of CO2, CO, MHC, NO (nitric oxide), N2O, O3, DMS (dimethyl sulfide), aerosol composition, and meteorological parameters. ABLE 2B had the Electra instrumented with remote and in-situ techniques for measuring the atmospheric distribution of a variety of carbon, nitrogen, and sulfur gases; aerosol size and composition; and to measure ozone. The typical approach to flights involved high-altitude passes over research areas using the downward facing UV Differential Absorption Lidar (DIAL). The ABLE 2 campaign represents a modest advance in understanding the influence of the tropical rain forest ecosystem on the chemistry of the troposphere. Detailed descriptions related to the motivation, implementation, and instrument payloads are available in the ABLE 2A overview paper and the ABLE 2B overview paper. A collection of the publications based on ABLE 2A and 2B observation are available in the Journal of Geophysical Research special issues: Global Tropospheric Experiment/Chemical Instrumentation Test and Evaluation Results (GTE/ABLE 2A) and The Amazon Boundary Layer Experiment 2B.

ABLE-2B_TraceGas_AircraftInSitu_Electra_Data

ABLE-2B_TraceGas_AircraftInSitu_Electra_Data is the in-situ trace gas data collected onboard the NASA Electra aircraft during the Amazon Boundary Layer Experiment - 2B (ABLE-2B) suborbital campaign. Data using chemiluminescence, gas traps, and grab samples are featured in this collection. Data collection for this product is complete. From 1983-2001, NASA conducted a collection of field campaigns as part of the Global Tropospheric Experiment (GTE). Among those were the Amazon Boundary Layer Experiment (ABLE 2) campaigns. ABLE 2 was divided into two sub-campaigns, ABLE 2A (dry season) and ABLE 2B (wet season). ABLE 2A took place from July-August 1985, while ABLE 2B took place from April-May 1987. The goal of ABLE 2 was to better understand the role of tropics in global atmospheric chemistry and investigate processes which might lead to the enhanced concentrations of carbon monoxide (CO) in the tropical upper troposphere. ABLE 2 was a partnership with NASA and the Brazilian agency, Instituto Nacional de Pesquisas Espaciais (INPE), along with the Instituto Nacional de Pesquisas da Amazonia (INPA) providing facilities and logistical information. To accomplish its objectives, the ABLE 2 science team deployed the NASA Lockheed Electra aircraft, balloons, and free-flying sondes. Flights took place over the Amazon region in Brazil for both sub-campaigns. ABLE 2A consisted of 15 flights while ABLE 2B consisted of 21 flights with the fully equipped Electra. For most ABLE 2A flights, the data collected included in-situ measurements of CO2, CO, MHC, NO (nitric oxide), N2O, O3, DMS (dimethyl sulfide), aerosol composition, and meteorological parameters. ABLE 2B had the Electra instrumented with remote and in-situ techniques for measuring the atmospheric distribution of a variety of carbon, nitrogen, and sulfur gases; aerosol size and composition; and to measure ozone. The typical approach to flights involved high-altitude passes over research areas using the downward facing UV Differential Absorption Lidar (DIAL). The ABLE 2 campaign represents a modest advance in understanding the influence of the tropical rain forest ecosystem on the chemistry of the troposphere. Detailed descriptions related to the motivation, implementation, and instrument payloads are available in the ABLE 2A overview paper and the ABLE 2B overview paper. A collection of the publications based on ABLE 2A and 2B observation are available in the Journal of Geophysical Research special issues: Global Tropospheric Experiment/Chemical Instrumentation Test and Evaluation Results (GTE/ABLE 2A) and The Amazon Boundary Layer Experiment 2B.

ABLE-2B_MetNav_AircraftInSitu_Electra_Data

ABLE-2B_MetNav_AircraftInSitu_Electra_Data is the in-situ meteorology and navigational data collected onboard the NASA Electra aircraft during the Amazon Boundary Layer Experiment - 2B (ABLE-2B) suborbital campaign. Data collection for this product is complete. From 1983-2001, NASA conducted a collection of field campaigns as part of the Global Tropospheric Experiment (GTE). Among those were the Amazon Boundary Layer Experiment (ABLE 2) campaigns. ABLE 2 was divided into two sub-campaigns, ABLE 2A (dry season) and ABLE 2B (wet season). ABLE 2A took place from July-August 1985, while ABLE 2B took place from April-May 1987. The goal of ABLE 2 was to better understand the role of tropics in global atmospheric chemistry and investigate processes which might lead to the enhanced concentrations of carbon monoxide (CO) in the tropical upper troposphere. ABLE 2 was a partnership with NASA and the Brazilian agency, Instituto Nacional de Pesquisas Espaciais (INPE), along with the Instituto Nacional de Pesquisas da Amazonia (INPA) providing facilities and logistical information. To accomplish its objectives, the ABLE 2 science team deployed the NASA Lockheed Electra aircraft, balloons, and free-flying sondes. Flights took place over the Amazon region in Brazil for both sub-campaigns. ABLE 2A consisted of 15 flights while ABLE 2B consisted of 21 flights with the fully equipped Electra. For most ABLE 2A flights, the data collected included in-situ measurements of CO2, CO, MHC, NO (nitric oxide), N2O, O3, DMS (dimethyl sulfide), aerosol composition, and meteorological parameters. ABLE 2B had the Electra instrumented with remote and in-situ techniques for measuring the atmospheric distribution of a variety of carbon, nitrogen, and sulfur gases; aerosol size and composition; and to measure ozone. The typical approach to flights involved high-altitude passes over research areas using the downward facing UV Differential Absorption Lidar (DIAL). The ABLE 2 campaign represents a modest advance in understanding the influence of the tropical rain forest ecosystem on the chemistry of the troposphere. Detailed descriptions related to the motivation, implementation, and instrument payloads are available in the ABLE 2A overview paper and the ABLE 2B overview paper. A collection of the publications based on ABLE 2A and 2B observation are available in the Journal of Geophysical Research special issues: Global Tropospheric Experiment/Chemical Instrumentation Test and Evaluation Results (GTE/ABLE 2A) and The Amazon Boundary Layer Experiment 2B.

ABLE-2B_Ground_Data

ABLE-2B_Ground_Data is the ground data collected during the Amazon Boundary Layer Experiment - 2B (ABLE-2B) suborbital campaign. Data using grab samples are featured in this collection. Data collection for this product is complete. From 1983-2001, NASA conducted a collection of field campaigns as part of the Global Tropospheric Experiment (GTE). Among those were the Amazon Boundary Layer Experiment (ABLE 2) campaigns. ABLE 2 was divided into two sub-campaigns, ABLE 2A (dry season) and ABLE 2B (wet season). ABLE 2A took place from July-August 1985, while ABLE 2B took place from April-May 1987. The goal of ABLE 2 was to better understand the role of tropics in global atmospheric chemistry and investigate processes which might lead to the enhanced concentrations of carbon monoxide (CO) in the tropical upper troposphere. ABLE 2 was a partnership with NASA and the Brazilian agency, Instituto Nacional de Pesquisas Espaciais (INPE), along with the Instituto Nacional de Pesquisas da Amazonia (INPA) providing facilities and logistical information. To accomplish its objectives, the ABLE 2 science team deployed the NASA Lockheed Electra aircraft, balloons, and free-flying sondes. Flights took place over the Amazon region in Brazil for both sub-campaigns. ABLE 2A consisted of 15 flights while ABLE 2B consisted of 21 flights with the fully equipped Electra. For most ABLE 2A flights, the data collected included in-situ measurements of CO2, CO, MHC, NO (nitric oxide), N2O, O3, DMS (dimethyl sulfide), aerosol composition, and meteorological parameters. ABLE 2B had the Electra instrumented with remote and in-situ techniques for measuring the atmospheric distribution of a variety of carbon, nitrogen, and sulfur gases; aerosol size and composition; and to measure ozone. The typical approach to flights involved high-altitude passes over research areas using the downward facing UV Differential Absorption Lidar (DIAL). The ABLE 2 campaign represents a modest advance in understanding the influence of the tropical rain forest ecosystem on the chemistry of the troposphere. Detailed descriptions related to the motivation, implementation, and instrument payloads are available in the ABLE 2A overview paper and the ABLE 2B overview paper. A collection of the publications based on ABLE 2A and 2B observation are available in the Journal of Geophysical Research special issues: Global Tropospheric Experiment/Chemical Instrumentation Test and Evaluation Results (GTE/ABLE 2A) and The Amazon Boundary Layer Experiment 2B.

ABLE-2B_Merge_Data

ABLE-2B_Merge_Data is the merge data collected onboard the NASA Electra aircraft during the Amazon Boundary Layer Experiment - 2B (ABLE-2B) suborbital campaign. Data using chemiluminescence, gas traps, and grab samples are featured in this collection. Data collection for this product is complete. From 1983-2001, NASA conducted a collection of field campaigns as part of the Global Tropospheric Experiment (GTE). Among those were the Amazon Boundary Layer Experiment (ABLE 2) campaigns. ABLE 2 was divided into two sub-campaigns, ABLE 2A (dry season) and ABLE 2B (wet season). ABLE 2A took place from July-August 1985, while ABLE 2B took place from April-May 1987. The goal of ABLE 2 was to better understand the role of tropics in global atmospheric chemistry and investigate processes which might lead to the enhanced concentrations of carbon monoxide (CO) in the tropical upper troposphere. ABLE 2 was a partnership with NASA and the Brazilian agency, Instituto Nacional de Pesquisas Espaciais (INPE), along with the Instituto Nacional de Pesquisas da Amazonia (INPA) providing facilities and logistical information. To accomplish its objectives, the ABLE 2 science team deployed the NASA Lockheed Electra aircraft, balloons, and free-flying sondes. Flights took place over the Amazon region in Brazil for both sub-campaigns. ABLE 2A consisted of 15 flights while ABLE 2B consisted of 21 flights with the fully equipped Electra. For most ABLE 2A flights, the data collected included in-situ measurements of CO2, CO, MHC, NO (nitric oxide), N2O, O3, DMS (dimethyl sulfide), aerosol composition, and meteorological parameters. ABLE 2B had the Electra instrumented with remote and in-situ techniques for measuring the atmospheric distribution of a variety of carbon, nitrogen, and sulfur gases; aerosol size and composition; and to measure ozone. The typical approach to flights involved high-altitude passes over research areas using the downward facing UV Differential Absorption Lidar (DIAL). The ABLE 2 campaign represents a modest advance in understanding the influence of the tropical rain forest ecosystem on the chemistry of the troposphere. Detailed descriptions related to the motivation, implementation, and instrument payloads are available in the ABLE 2A overview paper and the ABLE 2B overview paper. A collection of the publications based on ABLE 2A and 2B observation are available in the Journal of Geophysical Research special issues: Global Tropospheric Experiment/Chemical Instrumentation Test and Evaluation Results (GTE/ABLE 2A) and The Amazon Boundary Layer Experiment 2B.

ABLE-2B_Sondes_Data

ABLE-2B_Sondes_Data is the rawinsonde and tethered balloon data collected during the Amazon Boundary Layer Experiment - 2B (ABLE-2B) suborbital campaign. Data collection for this product is complete. From 1983-2001, NASA conducted a collection of field campaigns as part of the Global Tropospheric Experiment (GTE). Among those were the Amazon Boundary Layer Experiment (ABLE 2) campaigns. ABLE 2 was divided into two sub-campaigns, ABLE 2A (dry season) and ABLE 2B (wet season). ABLE 2A took place from July-August 1985, while ABLE 2B took place from April-May 1987. The goal of ABLE 2 was to better understand the role of tropics in global atmospheric chemistry and investigate processes which might lead to the enhanced concentrations of carbon monoxide (CO) in the tropical upper troposphere. ABLE 2 was a partnership with NASA and the Brazilian agency, Instituto Nacional de Pesquisas Espaciais (INPE), along with the Instituto Nacional de Pesquisas da Amazonia (INPA) providing facilities and logistical information. To accomplish its objectives, the ABLE 2 science team deployed the NASA Lockheed Electra aircraft, balloons, and free-flying sondes. Flights took place over the Amazon region in Brazil for both sub-campaigns. ABLE 2A consisted of 15 flights while ABLE 2B consisted of 21 flights with the fully equipped Electra. For most ABLE 2A flights, the data collected included in-situ measurements of CO2, CO, MHC, NO (nitric oxide), N2O, O3, DMS (dimethyl sulfide), aerosol composition, and meteorological parameters. ABLE 2B had the Electra instrumented with remote and in-situ techniques for measuring the atmospheric distribution of a variety of carbon, nitrogen, and sulfur gases; aerosol size and composition; and to measure ozone. The typical approach to flights involved high-altitude passes over research areas using the downward facing UV Differential Absorption Lidar (DIAL). The ABLE 2 campaign represents a modest advance in understanding the influence of the tropical rain forest ecosystem on the chemistry of the troposphere. Detailed descriptions related to the motivation, implementation, and instrument payloads are available in the ABLE 2A overview paper and the ABLE 2B overview paper. A collection of the publications based on ABLE 2A and 2B observation are available in the Journal of Geophysical Research special issues: Global Tropospheric Experiment/Chemical Instrumentation Test and Evaluation Results (GTE/ABLE 2A) and The Amazon Boundary Layer Experiment 2B.

Data Discovery

Explore this data using NASA's Earthdata Search, a comprehensive tool for discovering and visualizing Earth science datasets.

Data Access

Access requires an Earthdata Login account. Read our guide on obtaining AWS credentials to retrieve this data from AWS.

Update Frequency

Varies by dataset

License

Creative Commons BY 4.0

Documentation

https://www-gte.larc.nasa.gov/gte_hmpg.htm#table

Managed By

See all datasets managed by NASA.

Contact

https://earthdata.nasa.gov/contact

How to Cite

NASA ABLE-2 Project was accessed on DATE from https://registry.opendata.aws/nasa-able-2.